ECU系统软件工程师ECU System Engineer
Bosch · Changsha, China
What the posting says
Each fact was read from this posting and checked:Statedin the posting, quotedConflictsposted two ways, both shownNot mentionedwe looked; it is not there
- Employment typeStated
- Full time
Not mentioned in this posting
We read the whole posting. These are not in it. Not a no: ask the recruiter, in your own words.
- PayNot mentioned
- The posting does not say
- Work arrangementNot mentioned
- The posting does not say
- ShiftNot mentioned
- The posting does not say
- ExperienceNot mentioned
- The posting does not say
- EducationNot mentioned
- The posting does not say
- Visa sponsorshipNot mentioned
- The posting does not say
Requirements, each with its sentence from the posting
These are the employer’s words. The index does not judge whether you meet them.
- No requirement has been itemized for this posting yet. The employer’s words are in the full posting below.
Read the full posting as the employer wrote it
Company Description
Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the chance to improve quality of life all across the globe. Welcome to Bosch.
Job Description
ECU系统工程师（嵌入式软件方向），负责从系统/软件需求分解、ECU系统架构与软件架构设计、软硬件接口定义，到软件实现、系统集成验证与量产支持的全流程工作。
ECU System Engineer (embedded software-oriented), with automotive ECU system development as the primary responsibility — covering system/software requirement decomposition, ECU system and software architecture design, HW/SW interface definition, through software implementation, system integration & verification and production support.
- 分析产品系统/客户软件需求，分解为ECU系统需求与软件需求，理解其来源与追踪关系并准确落实到设计方案。
Analyzes system/software requirements; decomposes them into ECU system and software requirements; understands requirement sources and traceability, and implements them properly in design. - 参与ECU, SW 系统架构设计，负责嵌入式软件详细设计，包括底层驱动（MCAL/BSW）、应用层软件及软硬件接口定义。
Participates in ECU, SW system architecture design; performs embedded software detailed design, including low-level drivers (MCAL/BSW), application software and HW/SW interface definition. - 负责ECU软件集成与系统联调，包括编译构建、Bootloader/刷写、通信协议栈（CAN/CANFD/LIN）与UDS诊断集成，基于CANoe进行总线测试与系统级问题定位闭环。
Performs ECU software integration and system debugging, including build, Bootloader/flashing, communication stacks (CAN/CANFD/LIN) and UDS diagnostics integration; uses CANoe for bus testing and system-level issue analysis and closure. - 参与 ECU 原理图评审（schematic review）与 PCB review，重点评审 MCU、电源、复位、晶振、看门狗电路及外围器件选型；
Participates in HW/SW interface review, confirming pin mapping and consistency of peripheral resource configuration (ADC/PWM/SPI/I2C/UART/DMA) with software design;
- 支持样件试制、标定、HIL台架与整车联调验证、量产导入及客户技术问题的分析与闭环。
Supports prototype builds, calibration, HIL bench and vehicle-level validation, production introduction, and analysis/closure of customer technical issues.
Qualifications
BS or Master in electronics, automotive or software engineering background；电子、车辆工程或软件工程及相关专业，本科及以上学历
More than 5 years automotive ECU development experience, covering both system-level and embedded software work；
超过5年汽车ECU开发经验，具备ECU系统或者嵌入式软件开发经历
More than 5 years automotive ECU development experience, covering both system-level and embedded software work；
超过5年汽车ECU开发经验，具备ECU系统或者嵌入式软件开发经历
- capable of participating in hardware design reviews;
具备系统级问题分析与闭环能力，能主导跨领域（硬件/软件）技术协调。
Strong system-level problem-solving skills; able to lead cross-disciplinary (HW/SW) technical coordination.
Additional Information
Internal Referral bonus of this vacancy: RMB 3000(Valid only for Bosch associates).For the detailed regulation. please refer to Bosch China Internal Referral Policy
The posting text is reproduced as the employer wrote it; the index adds nothing to it.